Biewick, Laura R.H., 2008, Oil and Gas Exploration and Production in the State of Indiana Shown as Quarter-Mile Cells: U. S. Geological Survey, Denver, Colorado.This is part of the following larger work.Online Links:
Biewick, Laura R.H., 2008, Areas of Historical Oil and Gas Exploration and Production in the United States: U.S. Geological Survey Digital Data Series DDS-069-Q, U.S. Geological Survey, Denver, Colorado.Online Links:
This is a Vector data set. It contains the following vector data types (SDTS terminology):
Horizontal positions are specified in geographic coordinates, that is, latitude and longitude. Latitudes are given to the nearest 0.000001. Longitudes are given to the nearest 0.000001. Latitude and longitude values are specified in Decimal degrees.
The horizontal datum used is North American Datum of 1983.
The ellipsoid used is Geodetic Reference System 80.
The semi-major axis of the ellipsoid used is 6378137.000000.
The flattening of the ellipsoid used is 1/298.257222.
| Range of values | |
|---|---|
| Minimum: | -88.1 |
| Maximum: | -84.7 |
| Units: | decimal degrees |
| Range of values | |
|---|---|
| Minimum: | 37.7 |
| Maximum: | 41.8 |
| Units: | decimal degrees |
| Value | Definition |
|---|---|
| 1 | Cell contains at least one productive oil well, but no productive gas wells (green). |
| 2 | Cell contains at least one productive gas well, but no productive oil wells (red). |
| 3 | Cell contains at least one productive oil well and at least one productive gas well or one well producing both oil and gas (gold). |
| 4 | The type of production of the wells located within the cell is unknown, or the wells within the cell had no production (charcoal). |
To aggregate well data into quarter-mile cells, oil and gas well data were run through an Arc Macro Language (AML) program written by L.R.H. Biewick, S. Weiler, and C.C. Skinner. The source wells data set is from the Indiana Geological Survey, Petroleum Database Management System (PDMS) <http://igs.indiana.edu/pdms/>
303-236-7773 (voice)
datamgt@usgs.gov
This Geographic Information System (GIS) dataset was created to display present and past oil and gas production in the United States, as well as the location and intensity of exploratory drilling outside producing areas. This map compilation is an updated version of the USGS map that was published by Mast and others (1998). This product differs from other oil and gas maps of the United States in the following ways: (1) the oil and gas data sources are current as of 2004 through 2006, (2) base cartographic reference data are included, using the USGS National Map and a World Shaded Relief map service from the ESRI geography network, (3) an internet map service is available online, (4) Alaska oil and gas data are included. To construct this map, digital data were used from more than 3 million wells in IHS Inc.'s PI/Dwights PLUS Well Data on CD-ROM, current through 10/1/2005. In some areas, the PI/Dwights data tend not to be complete, particularly for pre-1920 production. IHS data was supplemented with state wells databases for Indiana, Pennsylvania, Kentucky, Illinois, and Ohio, (current as of 2004 to 2006).
Indiana Geological Survey, Charles W. Zuppann, Premkrishnan Radhak, 2004, PETROLEUM DATABASE MANAGEMENT SYSTEM version 2.0: Microsoft SQL Server database for managing petroleum well data in Indiana: Indiana Geological Survey, Bloomington, IN.Online Links:
Petroleum companies in Indiana, Indiana Department of Natural R, Division of Oil and Gas, and Survey, Indiana Geological , 19959216, Not applicable.
Person who carried out this activity:
303-236-7773 (voice)
datamgt@usgs.gov
The cell locations and cell attributes were visually compared to the hard-copy map: Mast, R.F., Root, D.H., Williams, L.P., Beeman, W.R., and Barnett, D.L., 1998, Areas of historical oil and gas exploration and production in the conterminous United States: U.S. Geological Survey Oil and Gas Investigations Map I-2582, 1 sheet; <http://energy.cr.usgs.gov/oilgas/noga/oilgasmap.htm> and <http://pubs.usgs.gov/of/1995/ofr-95-0075-c/>
A visual comparison was made using a sampling of cell locations and cell attributes with well locations and attributes. Although well locations in the PDMS are normally staked by a registered surveyor, the Indiana Geological Survey (IGS) has determined that the locations and elevations reported are occasionally erroneous. Consequently, in the 1950s, the IGS began checking the locations and elevations of new and older wells in the field. Most well locations in Indiana have been verified in the field. The field checking process is performed with a surveyor's altimeter and USGS topographic map, and is subject to the abilities of the geologist, the accuracy of the altimeter (generally in the range of 3 feet) and the reliability of the base elevations posted on the topographic map and of the map itself. A staked location that has been field checked is sometimes moved a short distance when the well is drilled, so the field checked location will be slightly inaccurate (generally less than 30 feet off). A location checked after a dry hole has been plugged is subject to some error, the amount depending on the situation.
Not applicable.
The Indiana Geological Survey is anxious to provide the most complete and accurate petroleum well information in the PDMS, which was used as the source wells data for these 1/4-sq. mi. cells. The current version of the PDMS contains a wealth of useful information, however, it will take considerable time and resources to enter and review all available data. Users of the PDMS should bear in mind that it has not been "finished." <http://igs.indiana.edu/pdms/Help/pdmshelpindex.htm>
The accuracy of the cells, as created by the Arc Macro Language (AML) program of L.R.H. Biewick, S. Weiler and C.C. Skinner, depends upon the accuracy of the locatable oil and gas wells GIS data layer from the Indiana Geological Survey, Petroleum Database Management System (PDMS). For the USGS map compilation showing Areas of Historical Oil and Gas Exploration and Production in the United States, the assumption was made that the data from the Indiana Geological Survey were of sufficient accuracy for such a national-scale analysis.
Are there legal restrictions on access or use of the data?
- Access_Constraints:
- There are no constraints on the access of this data layer. Also, the Petroleum Database Management System (PDMS) is available to anyone, subject to current freedom of information statutes in the state of Indiana.
- Use_Constraints:
- This database may not be distributed in whole or in part without acknowledgement of the Indiana Geological Survey and the U.S. Geological Survey. The Petroleum Database Management System (PDMS) wells data set that serves as the source for these cells was compiled by Indiana University, Indiana Geological Survey, using data believed to be accurate; however, a degree of error is inherent in all data. The PDMS is distributed "AS-IS" without warranties of any kind, either expressed or implied, including but not limited to warranties of suitability of a particular purpose or use. No attempt has been made in either the designed format or production of these data to define the limits or jurisdiction of any federal, state, or local government. They are not to be construed as a legal document or survey instrument. A detailed on-the-ground survey and historical analysis of a single site may differ from this data. See <http://igs.indiana.edu/pdms/>
1-888-ASK-USGS (voice)
303-202-4693 (FAX)
ask@usgs.gov
Downloadable Data
Although these data have been processed successfully on a computer system at the U.S. Geological Survey, no warranty expressed or implied is made regarding the display or utility of the data on any other system, or for general or scientific purposes, nor shall the act of distribution constitute any such warranty. The U.S. Geological survey shall not be held liable for improper or incorrect use of the data described and/or contained herein. Any use of trade, product, or firm names is for descriptive purposes only and does not imply endorsement by the U.S. Government. Although this information product, for the most part, is in the public domain, it also contains copyrighted materials as noted in the text. Permission to reproduce copyrighted items for other than personal use must be secured from the copyright owner.
| Data format: | Oil and gas quarter-mile cell geographic features and attribute data in format Shapefile |
|---|---|
| Network links: |
<http://certmapper.cr.usgs.gov/data/noga00/natl/spatial/shape/incells06g.zip> |
| Data format: | Oil and gas quarter-mile cell geographic features and attribute data in format ArcInfo Export File |
|---|---|
| Network links: |
<http://certmapper.cr.usgs.gov/data/noga00/natl/spatial/export/incells06ge.zip> |
| Data format: | A web-based interactive mapping system that accesses an ArcIMS Map Service running on certmapper.cr.usgs.gov. in format Image Map Service (US_Production) (version 9x) ArcIMS Image Map Service |
|---|---|
| Network links: |
<http://certmapper.cr.usgs.gov/pubs/servlet/MapViewerBroker?project=national&Service=US_Production&OVMap=US_overview> |
| Data format: | Contains polygon features depicting oil and gas cells in the State of Indiana in format ArcGIS Geodatabase File (version 9x) |
|---|---|
| Network links: |
<http://certmapper.cr.usgs.gov/data/noga00/natl/spatial/geodatabase/uscells06gg.zip> |
These products can be downloaded individually using any one of the Network_Resource_Name URLs above. Each of these URLs provide access to various formats of these data.
Send email to datamgt@usgs.gov or call the USGS Central Energy Team main office at 303-236-1644.
Requires software that reads GIS data.
303-236-7773 (voice)
datamgt@usgs.gov